15mm White SPEEDFIT Collet Locking Clip - CM1815W - Pack of 10

£9.9
FREE Shipping

15mm White SPEEDFIT Collet Locking Clip - CM1815W - Pack of 10

15mm White SPEEDFIT Collet Locking Clip - CM1815W - Pack of 10

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Speedfit needs no jointing materials, eliminating the risk of fire from the use of blowlamp, solder and flux. Traditional joists That’s right, plastic push-fit fittings are completely tool free. The pipe simply needs to be inserted within the fitting, where leak free connection is ensured with that same push-fit action, for which no tools are required. Because of this push-fit fittings are entirely demountable, meaning they can be disconnected and reused should a system need to be dismounted. Speedfit pipework can be easily cabled through studwork and within wall systems as well as behind “dot and dab” plasterboard installations. Speedfit 10mm B-PEX Barrier pipe is most commonly used to feed radiators. If incorporating fittings in this way, collet covers or collet clips must be used within the Standard (PKM) range of fittings. Wet plaster Pipe clips should not be fitted any closer than 60mm from the end of the fitting to allow for expansion. Pipes should always be adequately supported to prevent undue stress or side load on the fittings. Recommended Clip spacing Pipe Diameter Whether you are working on a new build or a repair and maintenance job, Speedfit fittings come in a wide range of sizes to suit any domestic or light commercial application. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves, and Flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create truly flexible and affordable plumbing and heating system.

The second type uses a screw and, therefore, takes a little longer to fix. When pipes are required to cross over, it is possible to add a spacer to the clip. This will give room between the pipe and the wall to allow the pipes to cross over. If pipework needs to be insulated, using the spacer will give room for the lagging to be applied.

Speedfit pipe and fittings are stabilised to withstand limited exposure to ultra-violet radiation in sunlight but are not designed for permanent direct exposure. Under such conditions painting or lagging is required. Pipe and fittings should also be lagged to prevent frost damage. Chemical Effects If the pipe passes through an external wall, care must be taken not to damage the vapour barrier. The pipe should be installed on the inside of the thermal insulation layer. If this is not possible, the use of conduit should be specified at the design stage. Steel framed construction The JG Speedfit Technical Advisory Service is available to assist and advise on all aspects of using the Speedfit system. The service is available between 8.00am and 4.30pm, Monday to Friday on Telephone No. 01895 425333 and Fax No. 01895 425319. Products within this Online Guide are designed for use within UK plumbing and heating installations or in other countries where similar installation requirements apply. For more information on products suitable for use in other countries please consult our Technical Advisory Service. Sealed central heating systems provided temperatures and pressures comply with BS7291 Parts 1 and 3 Class S

Flux residues used in the soldering of capillary fittings are very corrosive. Dirt and grit, which can enter the system when Speedfit pipe is being pushed through underfloor or across a roof space, must be removed.

All John Guest products are accredited with the leading testing and approval organizations, including WRAS, and are suitable for use with plastic or copper pipe. Features: Remember that pressure testing is NOT a substitute for making sure fittings are clean and free of any grit, dirt or swarf and the pipe is correctly inserted (see “How to Make a Connection”). System Commissioning and Flushing

Pipe will be distorted showing either a ‘Parrot beak’ look or a long opening with the edges of the pipe melted in a wave shape. The flexibility of Speedfit pipe gives it the ability to be threaded through concealed or inaccessible spaces without disruption to surrounding structure, making major savings in installation time. Holes may be located vertically anywhere in the web, but leave 3mm web at the top and/or bottom of hole. Do not cut into joist flanges when cutting the web. Speedfit is well suited for timber frame construction. Ensure that the structural integrity is not compromised when installing the pipework.Tests within the Water Regulations Advisory Scheme have approved Speedit pipe and fittings to BS 6920 for water quality. System testing Ensure the pipe is free of score marks. Cut the pipe square. When using Speedfit Barrier Pipe cut along an insertion mark. We recommend the use of JG Pipe Cutters. To prevent damage to the ‘O’ ring remove all burrs and sharp edges. Rigid pipe, such as copper, can only be fed under floor in short lengths. However, Speedfit pipe, being flexible, can run from one fitting to another without having to install a connector in between. Problem: The fitting has blown off the pipe. Fitting is missing the collet, the pipe insert is still inside the fitting after the pipe has come out. The maximum heat carrying capacity and flow of Speedfit pipe, based on 1.2m/s velocity and an 11°C temperature drop is shown in the table below. Pipe size



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop